Hello valfor,
Go to the following page
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Drivers-for-Win-7-64bit-HP-2000-2d54SR/td-p/3715986
Select "Microsoft Windows 7 (64-bit)" from the dropdown list.
Expand and download a driver, one at a time.
Does it still report wrong OS?
↧
Re: Drivers for Win 7 64bit HP 2000-2d54SR
↧
Re: Missing Video driver and Audio driver.
haha, yeah!
If you do, may I buy a beer to you!
Well, here we go.
Video & Chipset, I could install without problems.
But, the Audio, show me an error as usual.
"The hardware detected is not supported by this IDT software package. The install will be aborted."
And then, the Window close.
Did I pass to you the corrects ID's? I'm completely without audio in my notebook. Nothing nothing and nothing. And I'm scared that I had pass the wrong one.
I have some ID's, there is two things called "Microsoft UAA Bus Driver for High Definition Audio". I'll pass here, just in case.
Name: Microsoft UAA Bus Driver for High Definition Audio
Id's: PCI\VEN_1002&DEV_1314&SUBSYS_188F103C&REV_00
PCI\VEN_1002&DEV_1314&SUBSYS_188F103C
PCI\VEN_1002&DEV_1314&CC_040300
PCI\VEN_1002&DEV_1314&CC_0403
Name: Microsoft UAA Bus Driver for High Definition Audio
Id's: PCI\VEN_1022&DEV_780D&SUBSYS_188F103C&REV_01
PCI\VEN_1022&DEV_780D&SUBSYS_188F103C
PCI\VEN_1022&DEV_780D&CC_040300
PCI\VEN_1022&DEV_780D&CC_0403
There is these two.
Anyway, help me and I pay the beer! haha
Thank you,
Regards,
Andi.
P.s: I don't know if matters the order, but first, I installed the Chipset Driver, then the Video driver, and when this one finished, the last one, Audio driver.
↧
↧
Re: 17t-j100 Touchsmart and Windows 7
Hi:
The 1t7t-j100's support and driver page has all of the W7 x64 drivers necessary.
In order to dual boot you would just need to enable legacy mode and disable secure boot in the BIOS to run both operating systems.
↧
Re: Missing Video driver and Audio driver.
Hi, Andi:
Yes, unfortunately that model has the IDT and not the Realtek audio which is going to make it very hard if not impossible to get the audio driver to work.
Please post the hardware ID for the IDT audio device. I will need it to see if the hardware ID is in the driver I posted or if I need to look for some others that may work.
See if this driver installs the msuaa...
↧
Re: 17t-j100 Touchsmart and Windows 7
Thank you very much!! I've looked at various models and obviously didn't see this.
↧
↧
Re: 17t-j100 Touchsmart and Windows 7
You're very welcome.
That is a new model that HP sells with W7 64 bit as well.
↧
Re: OS for Compaq nx6120
Thanks for that advice, Paul.
You sound as if you have all the bases covered; you fill me with confidence.
greggy43
↧
Re: OS for Compaq nx6120
You're very welcome.
If you decide to install W7 32 bit on your PC, I will be happy to help you get the drivers you need if you get stuck.
↧
Re: 17t-j100 Touchsmart and Windows 7
I haven't been able to find a configuration option for Win7 on the 17 inch versions. I have seen it for the 15 inch screen. I'll look again when I have a little time. Thanks again for your help tonight.
↧
↧
Re: 17t-j100 Touchsmart and Windows 7
You're right.
I can only find the 15.6 screen model of the one you want but the hardware is exactly the same which must be why HP tossed in the W7 x64 drivers.
This is all I could come up with for W7 PC's offered currently.
↧
Re: win8 hard drive failure. trying to reinstall win8
I tried cloning the partition and everything worked and copied over succesfully. after I try to reboot, it does not work and it boots right into the OS i have on the laptop. do I have any other options or things to try? this is getting really frustrating.
↧
Re: Can I upgrade the preinstalled windows 7 home premium from 32 bit to 64 bit with the same licens
Thanks Paul,
So basically the OEM version, 32 or 64 bit, of Windows that is pre-installed on the computer is the only version that computer can have with that license.
Would it be worth a try to contact HP to see if they've got a 64-bit recovery disc of some sort?
So basically the OEM version, 32 or 64 bit, of Windows that is pre-installed on the computer is the only version that computer can have with that license.
Would it be worth a try to contact HP to see if they've got a 64-bit recovery disc of some sort?
↧
Re: Can I upgrade the preinstalled windows 7 home premium from 32 bit to 64 bit with the same licens
Anytime.
It wouldn't hurt to ask.
I know on some business PC's they have recovery disks for both bit versions.
↧
↧
hp dv7 with beats audio
hp dv7 was working fine yesterday and today blank white screen won't let me see anything how do I fix this as I just bought this thing from the pawn shop
↧
Re: Can I upgrade the preinstalled windows 7 home premium from 32 bit to 64 bit with the same licens
Will do Paul, if not I'll just go and find a retail version.
Once again, appreciate your assistance!
Once again, appreciate your assistance!
↧
Re: Missing Video driver and Audio driver.
Well, well, well. I hope there is.. I really want to stay in Windows XP.
What I don't get, is that sometimes the audio really works!! I watched 2 movies earlier, and do not show any problems. But when I restarted the computer, the audio stopped working.
Anyway, let's see.
I searched for any "IDT audio device" on the Device Manager, and I couldn't find it.
I made a restore, and the system is just like when I finished install the Windows XP.
There is the items:
Audio Device on High Definition Audio Bus;
Network Controller;
PCI Device;
SM Bus Controller;
Unkown Device (ACPI);
Unknown Device (AMD USB 3.0), and
Video Controller (VGA Compatible).
Is any of those?
If isn't, please guide me to the part where is located the "Idt Audio Device".
Before I forget, I tried the archive that you post to fix the msuaa, and didn't work, neither before the system restore, and neither after, nothing changed.
Thank you for the attention, Paul!
Regards,
Andi.
↧
Re: Bios Update?
So I just updated my Bios to the following listed in the reply, And my question is what did the BIOs update fix. There was a very brief explanition on memory optimization. The reaso I am asking is befor I updated I tryed to put 16 GB of ram in my Laptop and I keept getting memory dumps aka blue screen of death. Befor I go putting that memory which was two 8gb sticks of memory back in this laptop I would like to know if that BIOs update addresses that Issue?
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
System Manufacturer Hewlett-Packard
System Model HP Pavilion dv7 Notebook PC
System Type x64-based PC
Processor Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
************BIOS Version/Date Hewlett-Packard F.1C, 1/23/2013********************
OS Name Microsoft Windows 7 Ultimate
Installed Physical Memory (RAM) 8.00 GB
↧
↧
Re: Vista Lan Adapter Driver for Pavilion DV6220TX
Paul
Some extra info for you on this. When Vista starts it tries to install the driver for the Lan Adapter but can not find it so asks for the driver CD or location. When I point Vista to the driver location it tries to install but it can not and is now saying registry key missing. I do not know what reg key missing. I do know at the key shown below there are values missing.
Key Name: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_1000&SUBSYS_30BB0004&REV_00\4&2ca88c27&3&00E2 Class Name: <NO CLASS> Last Write Time: 3/31/2014 - 2:06 PM Value 0 Name: Capabilities Type: REG_DWORD Data: 0
Value 1 Name: HardwareID Type: REG_MULTI_SZ Data: PCI\VEN_8086&DEV_1000&SUBSYS_30BB0004&REV_00 PCI\VEN_8086&DEV_1000&SUBSYS_30BB0004 PCI\VEN_8086&DEV_1000&CC_020000 PCI\VEN_8086&DEV_1000&CC_0200
Value 2 Name: CompatibleIDs Type: REG_MULTI_SZ Data: PCI\VEN_8086&DEV_1000&REV_00 PCI\VEN_8086&DEV_1000 PCI\VEN_8086&CC_020000 PCI\VEN_8086&CC_0200 PCI\VEN_8086 PCI\CC_020000 PCI\CC_0200
Value 3 Name: ConfigFlags Type: REG_DWORD Data: 0x10040
Value 4 Name: LocationInformation Type: REG_SZ Data: @system32\drivers\pci.sys,#65536;PCI bus %1, device %2, function %3;(5,0,0)
Key Name: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_1000&SUBSYS_30BB0004&REV_00\4&2ca88c27&3&00E2\Device Parameters Class Name: <NO CLASS> Last Write Time: 3/31/2014 - 2:06 PM
Key Name: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_1000&SUBSYS_30BB0004&REV_00\4&2ca88c27&3&00E2\LogConf Class Name: <NO CLASS> Last Write Time: 3/31/2014 - 2:06 PM Value 0 Name: BasicConfigVector Type: REG_RESOURCE_REQUIREMENTS_LIST Data: Interface Type: PCI Bus Number: 5 Slot Number: 0 List 0 Descriptor 0 Resource: Memory Option: 0x00000001 Disposition: Device Exclusive Type: Read / Write Length: 20000 Alignment: 1 Minimum Address: 0x00000001 Maximum Address: 0xda000000
Descriptor 1 Resource: Memory Option: 0x00000008 Disposition: Device Exclusive Type: Read / Write Length: 20000 Alignment: 20000 Minimum Address: 0x00020000 Maximum Address: 0x00000000
Descriptor 2 Resource: Port Option: 0x00000001 Disposition: Device Exclusive Type: Port Length: 0x20 Alignment: 0x1 Minimum Address: 0x00004000 Maximum Address: 0x0000401f
Descriptor 3 Resource: Port Option: 0x00000008 Disposition: Device Exclusive Type: Port Length: 0x20 Alignment: 0x20 Minimum Address: 0x00000000 Maximum Address: 0xffffffff
Descriptor 4 Resource: Interrupt Option: 0x00000000 Disposition: Shared Type: Level Sensitive Minimum Vector: 0 Maximum Vector: 0xffffffff
Value 1 Name: BootConfig Type: REG_RESOURCE_LIST Data: Full Resource Descriptor 0 Interface Type: PCI Bus Number: 5 Version: 1 Revision: 1 Partial Descriptor 0 Resource: Memory Disposition: Device Exclusive Start: 0xda000000 Length: 20000 Type: Read / Write
Partial Descriptor 1 Resource: Port Disposition: Device Exclusive Start: 0x00004000 Length: 0x20 Type: Port
Partial Descriptor 2 Resource: Interrupt Disposition: Shared Vector: 3 Level: 3 Affinity: 0xffffffff Type: Level Sensitive
Key Name: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_1000&SUBSYS_30BB0004&REV_00\4&2ca88c27&3&00E2\Control Class Name: <NO CLASS> Last Write Time: 3/31/2014 - 2:06 PM
↧
Re: Can't run chkdsk due to "recent software installation"
Hello,
Thank you for posting in the HP Support forum.
While it is very difficult to troubleshoot such issues without specific clue on a forum, I would suggest the following:
- If your HP computer came with Windows preinstalled, then I would suggest you try to back up your files on external media and them perform HP System Recovery. This will restore your Windows to factory default condition. Here are instructions:
Windows 7: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867418&cc=bg&dlc=en&lc=en
Windows 8: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03489643&cc=bg&dlc=en&lc=en
- If your HP computer did not come with Windows preinstalled but you installed the operating system post-purchase, then I would recommend you back up your files and reinstall Windows. Do not forget to visit the HP site to get the latest drivers for your computer as you will need them afterwards.
Please, let me know if something is not clear and don't hesitate to ask for help if you face issues.
*** If you want to say "Thanks!" and show appreciation for advice, click on the white KUDOS thumb up (on the left). If your problem has been solved - click the appropriate button and accept the post as solution. If you want to provide more opinion and words, send me a private message***
↧
Re: Downgrading from windows 8 to 7 - Sleekbook pavilion 15 b160sa
Fantastic ! That one worked fine.
Many thanks for the effort both of you have put in to helping me with this one. Highly appreciated.
M
↧