Hello ROSot,
I see that you've used the diskpart command to try to and use the recovery partition. I will try to assist you with this.
What appears to have happened, is that by setting this to "Active" you have indirectly created a loop. Every time your computer starts up it'g going to try to perform a recovery, or use that partition. The only way around this would be trying to boot from disk. If your computer however is not set to use that as a boot device, then with not being able to get into the BIOS there may not be much left.
I would suggest if you have recovery disks to try those, to see if it will allow you to do anything. If you cannot the only option left is to contact support.
HP Technical Support, North America 1-800-474-6836. For all other regions click here.
As a future reference if you are trying to do a system recovery you may want to look up the appropriate documentation on how to do this.
Thank you for posting on the HP Forums.
↧
Re: Recovery error
↧